Dxe core is started что это
Dxe core is started что это
14 Reserved.
15 Pre-memory North-Bridge initialization is started.
16
18 Reserved.
Показать полностью.
19 Pre-memory South-Bridge initialization is started.
1A
2F Memory initialization.
31 Memory installed.
32
36 CPU PEI initialization.
37
3A IOH PEI initialization.
3B
3E PCH PEI initialization.
3F
4F Reserved.
60 DXE Core is started.
61 NVRAM initialization.
62 Installation of the PCH runtime services.
63
67 CPU DXE initialization is started.
68 PCI host bridge initialization is started.
69 IOH DXE initialization.
6A IOH SMM initialization.
6B
6F Reserved.
70 PCH DXE initialization.
71 PCH SMM initialization.
72 PCH devices initialization.
73
77 PCH DXE initialization (PCH module specific).
78 ACPI Core initialization.
79 CSM initialization is started.
7A
7F Reserved for AMI use.
80
8F Reserved for OEM use (OEM DXE
initialization codes).
90 Phase transfer to BDS (Boot Device Selection) from DXE.
91 Issue event to connect drivers.Regular Boot
92 PCI Bus initialization is started.
93 PCI Bus hot plug initialization.
94 PCI Bus enumeration for detecting how many resources are requested.
95 Check PCI device requested resources.
96 Assign PCI device resources.
97 Console Output devices connect(ex.Monitor is lighted).
98 Console input devices connect(ex.PS2/USB keyboard/mouse are activated).
99 Super IO initialization.
9A USB initialization is started.
9B Issue reset during USB initialization process.
9C Detect and install all currently connected USB devices.
9D Activated all currently connected USB devices.
9E
9F Reserved.
A0 IDE initialization is started.
A1 Issue reset during IDE initialization process.
A2 Detect and install all currently connected IDE devices.
A3 Activated all currently connected IDE devices.
A4 SCSI initialization is started.
A5 Issue reset during SCSI initialization process.
A6 Detect and install all currently connected SCSI devices.
A7 Activated all currently connected SCSI devices.
A8 Verify password if needed.
A9 BIOS Setup is started.
AA Reserved.
AB Wait user command in BIOS Setup.
AC Reserved.
AD Issue Ready To Boot event for OS Boot.
AE Boot to Legacy OS.
AF Exit Boot Services.
B0 Runtime AP installation begins.
B1 Runtime AP installation ends.
B2 Legacy Option ROM initialization.
B3 System reset if needed.
B(4,5) USB(PCI) device hot plug-in.
B6 Clean-up of NVRAM.
B7 Reconfigure NVRAM settings.
B8
CF Reserved.
E0 S3 Resume is stared(called from DXE IPL).
E1 Fill boot script data for S3 resume.
E2 Initializes VGA for S3 resume.
E3 OS S3 wake vector call.S3 Resume
F0 Recovery mode will be triggered due to invaild firmware volume detection.
F1 Recovery mode will be triggered by user decision.
F2 Recovery is started.
F(3,4)Recovery firmware image is found(loaded)
F5
F7 Reserved for future AMI progress codes.
50
55 Memory initialization error occurs.
56 Invalid CPU type or speed.
57 CPU mismatch.
58 CPU self test failed or possible CPU cache error.
59 CPU micro-code is not found or micro-code update is failed.
5A Internal CPU error.
5B Reset PPI is failed.
5C
5F Reserved.
D(0,1,2)-(CPU,IOH,PCH) initialization error.
D3 Some of the Architectural Protocols are not
available.
D4 PCI resource allocation error. Out of Resources.
D5 No Space for Legacy Option ROM initialization.
D(6,7) No Console Output(input) Devices are found.
D8 It is an invaild password.
D9
DA Can’t load Boot Option.
DB Flash update is failed.
DC Reset protocol is failed.
DE
DF Reserved.
E8 S3 resume is failed.
E9 S3 Resume PPI is not found.
EA S3 Resume Boot Script is invaild.
EB S3 OS Wake call is failed.
EC
EF Reserved.
F8 Recovery PPI is invaild.
F9 Recovery capsule is not found.
FA Invalid recovery capsule.
FB
Dxe core is started что это
Конфигурация PC:
CPU: Intel i7-9800X
MB: Asus Workstation X299 SAGE
ОЗУ: Samsung 128 ГБ 2400 МГц
HDD/SSD: Intel Optane 905P 960 ГБ — система Intel Optane 900P 280 ГБ x2 (RAID 0 Vroc) — скретч | Intel Optane P4800X 750 ГБ — файлопомойка | Intel X-25-E 32 ГБ x4 (RAID 0) — кеш | Samsung 960 PRO 512 ГБ — проекты | Intel P3600 1.6 ТБ (3шт) — проекты | Intel DC S4600 1.9 TБ (4шт) — проекты | Intel P4500 8 ТБ — хранилище Toshiba HDD 14 TB
Video: AMD Radeon PRO WX 4100 + Nvidia Quadro p600
Sound: Chord Mojo + Creative AE-5
АC: Audio-Technica ATH-AD2000X + Audio-Technica AT2020 USBi + Creative Woof 3
PCI: TP-Link Archer T6E
DVD/CD: Asus USB
Корпус: FD Define S2 VISION
БП: Seasonic Prime Titanium Ultra 1000W
Cooler: Noctua U12S + NB Bionic eLoop B12-1 (x2) NB Bionic eLoop B14-2(x4)
Монитор: Eizo ColorEdge CG319X
OS: Win 11 PRO ENG
Keyboard: Apple Magic keyboard 2
Mouse\other: Apple Magic Trackpad 2 | Wacom Intuos Pro S 2019 | Griffin Powermate
Ночь добрая, коллеги.
Прошу вашей помощи, т.к 2 дня я мучался и пыхтел, читал форумы, но не смог определить причины поломки не зная чего.
Суть проблемы. Мне по работе приходится таскать системник и моник. Я так уже года три. Вожу его на машина в салоне. в фирменной коробке. В общем в один из дней приехал, вынул, подключил провода, включил и всё нет сигнала на мониторе.
Моник в полном исправном состоянии. Чтобы было понятно что вообще творится при включении снял видео. Проблема в том, что нет сигнала, это меня вводить в ступор.
Вынимал планки памяти, думал с ними проблема, но даже с одной тоже самое. Отключал ссд, хдд, вынимал pcie хард, ничего не происходит. Вынул баттарейку биоса, вставил и опа есть сигнал ну и стандартный текст
New CPU установлен. проверьте настройки и потом самое интересно Chassis intrudet. Fatal Error System Halted.
Вырубаю блок, включаю тоже самое, а потом вдруг с ресета система грузится, смотрю биос, там вообще все ну как было когда мамку покупал. Т.е ничего не трогал, оставил как есть память (я ее обычно гоню), жму окей, винда грузится, я спокойно работаю, но как только я выключаю копм, все опять танцы и ситуация, что на видео. И я понять не могу, почему с выключением питание такая фигня происходит. Не знаю что вышло из строя. Может мамка погорела? или от перевосзки частой что-то вышло из строя? Биос джамперы тоже не дают результата. CMOS reset работает из раза к разу. Причем вынул вообще батарейку, в надежде что будет сигнал сразу и в биос кидать, ан нет, в общем не могу выявить системативность ошибки.
Dxe core is started что это
14 Reserved.
15 Pre-memory North-Bridge initialization is started.
16
18 Reserved.
19 Pre-memory South-Bridge initialization is started.
1A
2F Memory initialization.
31 Memory installed.
32
36 CPU PEI initialization.
37
3A IOH PEI initialization.
3B
3E PCH PEI initialization.
3F
4F Reserved.
60 DXE Core is started.
61 NVRAM initialization.
62 Installation of the PCH runtime services.
63
67 CPU DXE initialization is started.
68 PCI host bridge initialization is started.
69 IOH DXE initialization.
6A IOH SMM initialization.
6B
6F Reserved.
70 PCH DXE initialization.
71 PCH SMM initialization.
72 PCH devices initialization.
73
77 PCH DXE initialization (PCH module specific).
78 ACPI Core initialization.
79 CSM initialization is started.
7A
7F Reserved for AMI use.
80
8F Reserved for OEM use (OEM DXE
initialization codes).
90 Phase transfer to BDS (Boot Device Selection) from DXE.
91 Issue event to connect drivers.Regular Boot
92 PCI Bus initialization is started.
93 PCI Bus hot plug initialization.
94 PCI Bus enumeration for detecting how many resources are requested.
95 Check PCI device requested resources.
96 Assign PCI device resources.
97 Console Output devices connect(ex.Monitor is lighted).
98 Console input devices connect(ex.PS2/USB keyboard/mouse are activated).
99 Super IO initialization.
9A USB initialization is started.
9B Issue reset during USB initialization process.
9C Detect and install all currently connected USB devices.
9D Activated all currently connected USB devices.
9E
9F Reserved.
A0 IDE initialization is started.
A1 Issue reset during IDE initialization process.
A2 Detect and install all currently connected IDE devices.
A3 Activated all currently connected IDE devices.
A4 SCSI initialization is started.
A5 Issue reset during SCSI initialization process.
A6 Detect and install all currently connected SCSI devices.
A7 Activated all currently connected SCSI devices.
A8 Verify password if needed.
A9 BIOS Setup is started.
AA Reserved.
AB Wait user command in BIOS Setup.
AC Reserved.
AD Issue Ready To Boot event for OS Boot.
AE Boot to Legacy OS.
AF Exit Boot Services.
B0 Runtime AP installation begins.
B1 Runtime AP installation ends.
B2 Legacy Option ROM initialization.
B3 System reset if needed.
B(4,5) USB(PCI) device hot plug-in.
B6 Clean-up of NVRAM.
B7 Reconfigure NVRAM settings.
B8
CF Reserved.
E0 S3 Resume is stared(called from DXE IPL).
E1 Fill boot script data for S3 resume.
E2 Initializes VGA for S3 resume.
E3 OS S3 wake vector call.S3 Resume
F0 Recovery mode will be triggered due to invaild firmware volume detection.
F1 Recovery mode will be triggered by user decision.
F2 Recovery is started.
F(3,4)Recovery firmware image is found(loaded)
F5
F7 Reserved for future AMI progress codes.
50
55 Memory initialization error occurs.
56 Invalid CPU type or speed.
57 CPU mismatch.
58 CPU self test failed or possible CPU cache error.
59 CPU micro-code is not found or micro-code update is failed.
5A Internal CPU error.
5B Reset PPI is failed.
5C
5F Reserved.
D(0,1,2)-(CPU,IOH,PCH) initialization error.
D3 Some of the Architectural Protocols are not
available.
D4 PCI resource allocation error. Out of Resources.
D5 No Space for Legacy Option ROM initialization.
D(6,7) No Console Output(input) Devices are found.
D8 It is an invaild password.
D9
DA Can’t load Boot Option.
DB Flash update is failed.
DC Reset protocol is failed.
DE
DF Reserved.
E8 S3 resume is failed.
E9 S3 Resume PPI is not found.
EA S3 Resume Boot Script is invaild.
EB S3 OS Wake call is failed.
EC
EF Reserved.
F8 Recovery PPI is invaild.
F9 Recovery capsule is not found.
FA Invalid recovery capsule.
FB
Пост код d7(67) и АЕ материнская плата хуанан последней версии
в чем может быть проблема и во сколько может обойтись ремонт?
14 Reserved.
15 Pre-memory North-Bridge initialization is started.
16
18 Reserved.
19 Pre-memory South-Bridge initialization is started.
1A
2F Memory initialization.
31 Memory installed.
32
36 CPU PEI initialization.
37
3A IOH PEI initialization.
3B
3E PCH PEI initialization.
3F
4F Reserved.
60 DXE Core is started.
61 NVRAM initialization.
62 Installation of the PCH runtime services.
63
67 CPU DXE initialization is started.
68 PCI host bridge initialization is started.
69 IOH DXE initialization.
6A IOH SMM initialization.
6B
6F Reserved.
70 PCH DXE initialization.
71 PCH SMM initialization.
72 PCH devices initialization.
73
7F Reserved for AMI use.
80
8F Reserved for OEM use (OEM DXE
initialization codes).
90 Phase transfer to BDS (Boot Device Selection) from DXE.
91 Issue event to connect drivers.Regular Boot
92 PCI Bus initialization is started.
93 PCI Bus hot plug initialization.
94 PCI Bus enumeration for detecting how many resources are requested.
95 Check PCI device requested resources.
96 Assign PCI device resources.
97 Console Output devices connect(ex.Monitor is lighted).
98 Console input devices connect(ex.PS2/USB keyboard/mouse are activated).
99 Super IO initialization.
9A USB initialization is started.
9B Issue reset during USB initialization process.
9C Detect and install all currently connected USB devices.
9D Activated all curre
9F Reserved.
A0 IDE initialization is started.
A1 Issue reset during IDE initialization process.
A2 Detect and install all currently connected IDE devices.
A3 Activated all currently connected IDE devices.
A4 SCSI initialization is started.
A5 Issue reset during SCSI initialization process.
A6 Detect and install all currently connected SCSI devices.
A7 Activated all currently connected SCSI devices.
A8 Verify password if needed.
A9 BIOS Setup is started.
AA Reserved.
AB Wait user command in BIOS Setup.
AC Reserved.
AD Issue Ready To Boot event for OS Boot.
AE Boot to Legacy OS.
AF Exit Boot Services.
B0 Runtime AP installation begins.
B1 Runtime AP installation ends.
B2 Legacy Option ROM initialization.
B3 System reset if needed.
B(4,5) USB(PCI) device hot plug-in.
B6 Clean-up of NVRAM.
CF Reserved.
E0 S3 Resume is stared(called from DXE IPL).
E1 Fill boot script data for S3 resume.
E2 Initializes VGA for S3 resume.
E3 OS S3 wake vector call.S3 Resume
F0 Recovery mode will be triggered due to invaild firmware volume detection.
F1 Recovery mode will be triggered by user decision.
F2 Recovery is started.
F(3,4)Recovery firmware image is found(loaded)
F5
F7 Reserved for future AMI progress codes.
50
55 Memory initialization error occurs.
56 Invalid CPU type or speed.
57 CPU mismatch.
58 CPU self test failed or possible CPU cache error.
59 CPU micro-code is not found or micro-code update is failed.
5A Internal CPU error.
5B Reset PPI is failed.
5C
5F Reserved.
D(0,1,2)-(CPU,IOH,PCH) initialization error.
D3 Some of the Archite
DA Can’t load Boot Option.
DB Flash update is failed.
DC Reset protocol is failed.
DE
DF Reserved.
E8 S3 resume is failed.
E9 S3 Resume PPI is not found.
EA S3 Resume Boot Script is invaild.
EB S3 OS Wake call is failed.
EC
EF Reserved.
F8 Recovery PPI is invaild.
F9 Recovery capsule is not found.
FA Invalid recovery capsule.
FB
67 CPU DXE initialization is started
Проблема указывает на процессор, хотя сколотая обвязка вокруг сокета тоже не исключена.
Сила Pikabu помогите
При первом включении Материнской платы GIGABYTE AORUS GA-Z270X-Gaming 5 идет инициализация и вот тут у меня возникла проблема. Материнка доходит до POST кода 09 с индикатором VGA и 15 секунд стоит, а потом происходит сброс всего питания и снова идет загрузка, снова код 09 и все повторяется снова и снова.
Отключи все провода которые идет на корпусные юсб, звук.
Оставь только 1 планку оперативки в первом слоте.
Сделай сброс биоса.
Если после всего этого ошибка будет актуальной, попробуй тыкнуть F1.
Код 60:DXE Core is started.
Фаза DXE. (Driver eXecution Environment, Среда загрузки драйверов). Загрузка компонентов этой фазы базируется на ресурсах, которые были инициализированы в фазе PEI. Фаза окончательной инициализации всех устройств. Запуск служб UEFI: Boot Services, Runtime Services и DXE Services.
Загружается ядро DXE. Создается инфраструктура DXE: создаются необходимые структуры данных, база данных хендлов. Включает основные интерфейсы DXE. Запускает ряд сервисов: сервисы этапа загрузки (Boot Services), сервисы этапа выпонения (Runtime Services), сервисы фазы DXE (DXE Services).
Запуск диспетчера DXE. Посредством переданного из PEI списка Hand-off Block структур (HOB list) определяет доступные Firmware Volume (FV, структурированная база данных исполняемых модулей DXE: драйверов и приложений) и ищет в них драйвера, запускает их, соблюдая зависимости. В этот момент производится активация остальных компонентов, причем одновременно нескольких. Диспетчер грузит все доступные драйвера со всех доступных носителей.
Запускается UEFI Boot Manager. Это происходит после запуска всех драйверов. Управление передается в фазу BDS.