Error at line 1 autohotkey что делать
When executing AutoHotkey, I run into this error when I just start.
Error: This line does not contain a recognized action.
— Remove most of the scripts in the file
— Save the file as «UTF-8» and «Unicode»
Are you running AutoHotkey or are you running a script that needs autohotkey?
and, just in case, make sure to download the latest version of AutoHotkey from
Are you running AutoHotkey or are you running a script that needs autohotkey?
and, just in case, make sure to download the latest version of AutoHotkey from
I’m running AutoHotkey.
I even empty the whole file to avoid any possible error. And I still have the same problem.
By the way, since this is a Corpo laptop, I can’t install another version. My actual version is 1.048.05
Thank you for your help.
Whenever you start the AutoHotkey exe directly without giving it a script to run it automatically tries to run
a script named Autohotkey.ahk. To run individual scripts you have to create them with a text editor, save them
AutoHotkey. Failing that you can start AutoHotkey.exe with a script name as an argument. That way is a pain
in the hindquarters tho. Ok you’re using the early version of AutoHotkey (v1.0.48.05). The current version is
1.1.16.05. There are a lot of changes between the two versions and you might want your corpo IT guys to let
you download and set up the new version. Failing that you might want to rename the AutoHotkey.ahk file to
something else and start building your own scripts. A lot of the scripts you’ll find on the forums use new
techniques that your version can’t handle.
I can finally install the new version (1.1.16.05) on my laptop. Autohotkey can start, but it can’t replace the words correctly like it used to be.
The accents don’t show up anymore.
người is shown up incorrectly as nguoi
vừa is show up incorrectly as v?a
It worked very well on my previous laptop.
I use NotePad to save the file as Unicode or UTF-8. It doesn’t let me save as ANSI.
error at line 1 autohotkey
I’m currently trying to write an Autohotkey command, which pastes a SQL code, but i only get this message:
Error at line 3. Line Text: Create table #tmp (
Error: This line does not contain a recognized action.
The script was not reloaded; the old Version will remain in effect.
there are also some variations of this message.
I already tried to use SendRaw or SendInput. Even the escape character ´ does not work. Putting it in quotation marks neither. I do not have any clues anymore.
well, i expected it to send the SQL-Statement, but I’m just getting errors like the one above. Sometimes it refers to the line «Create Table #tmp(«, sometimes to «insert into #tmp (row1, number)». And I don’t know what to do. Does anyone has a clue and can help me with this?
Comments
Copy link Quote reply
quinnjamin commented Dec 8, 2014
At first it says «Error at line 15. The following variable name contains an illegal character: «File.Length» The program will exit.» I the only way i could get it to go away was to delete the period (.) but then it says «Error at line 21. Line Text: #If WinActive(«ahk_exe csgo.exe») Error: This line does not contain a recognized action. The program will exit.» I’m just having great difficulty getting this to work, I have never used anything like this (scripts or AutoHotKey) If you could help me it would be greatly appreciated!
This comment has been minimized.
Copy link Quote reply
valleyman86 commented Dec 14, 2014
Make sure you get the latest version of autohotkey.
On Sunday, December 7, 2014, quinnjamin notifications@github.com wrote:
At first it says «Error at line 15. The following variable name contains
an illegal character: «File.Length» The program will exit.» I the only way
i could get it to go away was to delete the period (.) but then it says
«Error at line 21. Line Text: #If WinActive(«ahk_exe csgo.exe») Error: This
line does not contain a recognized action. The program will exit.» I’m just
having great difficulty getting this to work, I have never used anything
like this (scripts or AutoHotKey) If you could help me it would be greatly
appreciated!
—
Reply to this email directly or view it on GitHub
#1.
Thread Tools
Display
Yeah maybe I’ll try that, I was thinking about it but thought it might take him off /follow but it doesn’t. I kind of wanted something that I didn’t have to conciously do every couple minutes but I guess jumping a couple times every 5 minutes isn’t hard lol.
EDIT: Meh.
This seems to work just fine. Dunno what I did wrong last time o.O
I have this problem with ahk. Currently I’m testing with two computers: a normal desktop pc and a laptop. I’m running two wow clients on both of them so I have four characters now. Main character is A which ofcourse runs on my primary computer. On the same computer is also other char which is B. Char C is fullscreen client on my laptop and D is minimized client. I’m using Synergy/Multibox (both of them seems to work exactly the same in WoW) to broadcast my keys from desktop pc to laptop. So A and C which are on fullscreen work just fine but B and D causes some problems.
I’ve been searching some scripts from this forum but no matter which one I use it does not work properly. For example I have Frost Armor binded to «1». When I hold 1 down on my keyboard B and D casts their frost armor instantly and keep casting it as long as the button is hold down. A and C in the other hand cast it only after the button is released, which is ofcourse how it should work. So the problem is that ahk keeps spamming the button up and down as long as I keep it pressed down. Any ideas?
The scripts I’ve tested this with:
Error at line 1
i am having issues running a script
well the script seems to be working but when i select ( ipad.local.txt ) i get a error message
ipad.local.txt is a list of codes i am using in my script
i will post the script i have ( seems to work )
also will post this weird error message
any advice would be appreciated, im new to autohotkey and need this to work
If anybody could give me some advice it would be greatly appreciated. thank you
Perhaps ControlSend is sending to the wrong window, as your WinTitle is ambiguous. For instance, the Notepad window and error window in your screenshots both have titles beginning with «ipad».
The variable ‘Finished’ isn’t used. That’s all I noticed, not sure if it will help.
Edit: Nevermind I suppose. This may or may not help me, this message has appeared when I tried to include a dll.
OS: Windows 7 Ultimate / Windows 8.1 Pro | Editor: Notepad++
Error at line 1 in #include file «
Line Text:
Error: This line does not contain a recognized action.
Perhaps ControlSend is sending to the wrong window, as your WinTitle is ambiguous. For instance, the Notepad window and error window in your screenshots both have titles beginning with «ipad».
Thank you very much for your advice
ok, i have made some small changes and changed my txt file to open with notepad and the script is a ( ahk script file )
I am not getting that error line 1 message anymore. But now when i run the script it says ( begin punching ) then i press ok and it says ( complete ). But nothing at all happens, lol
Also just so you guys are aware i am using this ahk script to enter codes on a ipad game called ( turf wars ) and i am doing this through ( veency )
Any advice would be appreciated. Thanks
Error at line 1 #498
Comments
joris-s-k commented Sep 6, 2017
Error on starting Run_TradeMacro.ahk.
Happens with 2.5.4 and 2.5.3
The text was updated successfully, but these errors were encountered:
Eruyome commented Sep 6, 2017
First of I’m not sure it’s a good idea to put ItemInfo/TradeMacro into the Path of Exile folder.
Secondly, why is your folder called ItemInfo when you’re using TradeMacro? Did you install both projects and put them into the same folder? Unless you simply decided to use that existing and empty folder or just renamed it that way I wouldn’t recommend it.
I suggest that you completely remove both projects (or the one that you have), including all contents of %USERPROFILE%\Documents\PoE-TradeMacro.
Duplicate function definition of that function means that the file CalcChecksum.ahk is being merged/included more than once, which simply doesn’t happen normally.
fuzzywolf commented Sep 7, 2017
For what it’s worth, I’m getting the exact same error. Downloaded the latest release (because the self updater failed). Extracted to %user%\Documents\poeTM. Failed with this type of error, except the path given in the error is %user%\lib\CalcChecksum.akh
aRTy42 commented Sep 7, 2017
When you manually downloaded the latest version, did you extract it into the existing folder? If so, please delete or rename the existing folder and extract the download into a fresh folder.
fuzzywolf commented Sep 7, 2017
Deleted everything, restarted computer, re downloaded, extracted to fresh folder. Error persists.
On windows 8.1, if that matters.
fuzzywolf commented Sep 7, 2017
Started downloading and extracting old builds (I skipped a few in personal use). 2.4.0 works. 2.5.0 does not.
I know that was a big update, so the info may not be super helpful 🙁
aRTy42 commented Sep 7, 2017 •
Are you sure the error says «%user%\lib\CalcChecksum.akh»? Shouldn’t there be a few more folders in between, something like «%user%\Documents\poeTM\lib\CalcChecksum.akh» from what you wrote ealier.
Also, just to be sure: What kind of autohotkey version are you using? If you don’t know: Launch the «Autohotkey.exe» itself, wherever you have installed that one and click on «Quick Reference» on the left side. It should tell you the version number in a huge font.
fuzzywolf commented Sep 7, 2017
Yes, there should be a few more folders in there. The path in the error message does not actually exist.
I’m running 1.1.26.01, the latest version of AHK.
aRTy42 commented Sep 7, 2017 •
Ok, about that user/documents folder then: Is that «poeTM» a folder you created, or was that a shorthand type thing you used here for the «%user%\Documents\PoE-TradeMacro» folder? Because that folder is created by the script to save personalized things away from the regularly changing main folder, the install should not go in there. Could you try extracting the program to a place that is similar to your other programs (I’d guess something like C:\Program Files\POE-TradeMacro).
fuzzywolf commented Sep 7, 2017
Ah yes, poeTM was what I called the folder I extracted to.
aRTy42 commented Sep 7, 2017 •
joris-s-k, since we successfully hijacked your thread, could you also try to extract/install the script somewhere that is not a subfolder of some Steam or PathOfExile or User folder − such as C:\Program Files\POE-TradeMacro or whatever suits you.
joris-s-k commented Sep 9, 2017 •
Moving it from the subfolder in PoE-Item Info to a seperate directory in the PoE folder (still steam) resolved the issue.
Still no idea why it suddenly stopped working. I had it in the Item Info folder for ages without any issues.
Please help! Invalid hotkey!
Please help!
I try launch this script:
but AutoHotkey (Version 1.0.44.02) tell me following:
Error at line 1.
Line Text: ^!s::Run calc.exe
Error: Invalid hotkey.
The program will exit.
Sorry for my bad english =)
I think its is because the notepad you use save it as unicode.
AHk only parse ASCII.
so open your script in Microsoft Notepad, and «save-as»
under Encoding: select «ANSI»
the script should now work 😉
I use Far Manager =)
I try use NotePad
Lets try to isolate the problem.
Does changing the hotkey help?
Or is it the same with any hotkey?
For example:
i want following:
Shift + Alt = Calc.exe
In tutorial wrote
^!c::Run calc.exe
IT’S DON’T WORK =(
if i try launch this script
#space::Run www.google.com
he work successfully =)
everything is mixed up 😆
But problem still not resolve 😥