Factory service mode ps3 что это
Factory service mode ps3 что это
НЕЛЬЗЯ ИСПОЛЬЗОВАТЬ НА НЕПРОШИВАЙКАХ!
Q: Can I use this with the RSOD fix self you released earlier?
A: You should only use the RSOD fix Lv2Diag.self to repair a RSOD PS3. Use the suplied Lv2diag.self packaged with this release to simply get out of service mode.
Q: I’m having problems. help.
A: Post the contents of the factory.txt, which is stored on the root of the USB flash drive where you put Lv2Diag.self, along with a detailed explanation and we will try to help you out. Without the contents of the factory.txt file. we will not be able to help.
Q: It doesn’t beep a single time for me, it beeps 3 times and goes back to the XMB. Can you help?
A: We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: failed to read EPROM», in the factory.txt error log. Can you help?
A: You likely heard 3 beeps. We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: SS EPROM read error returned: 1, product_mode: 0», in the factory.txt error log. Can you help?
A: You likely heard 3 beeps. We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: LV1 mmap hvcall 114 not available:», in the factory.txt error log. Can you help?
A: You likey have OFW (With Original PSJB Dongle even) or a reDRM Firmware. You will need to switch to a MFW to get this application to work.
Q: I see this, «ERROR: LV2 poke syscall not available:», in the factory.txt error log. Can you help?
A: You likey have OFW (With Original PSJB Dongle even) or a reDRM Firmware. You will need to switch to a MFW to get this application to work.
Q: I get a 80010505 error in factory.txt on the USB drive sometimes. HELP.
A: We noticed this on one Phat CECHG system in testing. but could not replicate it on other PS3’s and it only occured after the initial run from a power on of the PS3. In this case, every time we ran it a second time the application worked with out fail. Try again and post the factory.txt if the problem persists.
Q: Could you have made this just a little easier to use?
A: Nope! 😉
Factory service mode ps3 что это
НЕЛЬЗЯ ИСПОЛЬЗОВАТЬ НА НЕПРОШИВАЙКАХ!
Q: Can I use this with the RSOD fix self you released earlier?
A: You should only use the RSOD fix Lv2Diag.self to repair a RSOD PS3. Use the suplied Lv2diag.self packaged with this release to simply get out of service mode.
Q: I’m having problems. help.
A: Post the contents of the factory.txt, which is stored on the root of the USB flash drive where you put Lv2Diag.self, along with a detailed explanation and we will try to help you out. Without the contents of the factory.txt file. we will not be able to help.
Q: It doesn’t beep a single time for me, it beeps 3 times and goes back to the XMB. Can you help?
A: We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: failed to read EPROM», in the factory.txt error log. Can you help?
A: You likely heard 3 beeps. We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: SS EPROM read error returned: 1, product_mode: 0», in the factory.txt error log. Can you help?
A: You likely heard 3 beeps. We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: LV1 mmap hvcall 114 not available:», in the factory.txt error log. Can you help?
A: You likey have OFW (With Original PSJB Dongle even) or a reDRM Firmware. You will need to switch to a MFW to get this application to work.
Q: I see this, «ERROR: LV2 poke syscall not available:», in the factory.txt error log. Can you help?
A: You likey have OFW (With Original PSJB Dongle even) or a reDRM Firmware. You will need to switch to a MFW to get this application to work.
Q: I get a 80010505 error in factory.txt on the USB drive sometimes. HELP.
A: We noticed this on one Phat CECHG system in testing. but could not replicate it on other PS3’s and it only occured after the initial run from a power on of the PS3. In this case, every time we ran it a second time the application worked with out fail. Try again and post the factory.txt if the problem persists.
Q: Could you have made this just a little easier to use?
A: Nope! 😉
Factory service mode ps3 что это
НЕЛЬЗЯ ИСПОЛЬЗОВАТЬ НА НЕПРОШИВАЙКАХ!
Q: Can I use this with the RSOD fix self you released earlier?
A: You should only use the RSOD fix Lv2Diag.self to repair a RSOD PS3. Use the suplied Lv2diag.self packaged with this release to simply get out of service mode.
Q: I’m having problems. help.
A: Post the contents of the factory.txt, which is stored on the root of the USB flash drive where you put Lv2Diag.self, along with a detailed explanation and we will try to help you out. Without the contents of the factory.txt file. we will not be able to help.
Q: It doesn’t beep a single time for me, it beeps 3 times and goes back to the XMB. Can you help?
A: We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: failed to read EPROM», in the factory.txt error log. Can you help?
A: You likely heard 3 beeps. We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: SS EPROM read error returned: 1, product_mode: 0», in the factory.txt error log. Can you help?
A: You likely heard 3 beeps. We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: LV1 mmap hvcall 114 not available:», in the factory.txt error log. Can you help?
A: You likey have OFW (With Original PSJB Dongle even) or a reDRM Firmware. You will need to switch to a MFW to get this application to work.
Q: I see this, «ERROR: LV2 poke syscall not available:», in the factory.txt error log. Can you help?
A: You likey have OFW (With Original PSJB Dongle even) or a reDRM Firmware. You will need to switch to a MFW to get this application to work.
Q: I get a 80010505 error in factory.txt on the USB drive sometimes. HELP.
A: We noticed this on one Phat CECHG system in testing. but could not replicate it on other PS3’s and it only occured after the initial run from a power on of the PS3. In this case, every time we ran it a second time the application worked with out fail. Try again and post the factory.txt if the problem persists.
Q: Could you have made this just a little easier to use?
A: Nope! 😉
Factory service mode ps3 что это
НЕЛЬЗЯ ИСПОЛЬЗОВАТЬ НА НЕПРОШИВАЙКАХ!
Q: Can I use this with the RSOD fix self you released earlier?
A: You should only use the RSOD fix Lv2Diag.self to repair a RSOD PS3. Use the suplied Lv2diag.self packaged with this release to simply get out of service mode.
Q: I’m having problems. help.
A: Post the contents of the factory.txt, which is stored on the root of the USB flash drive where you put Lv2Diag.self, along with a detailed explanation and we will try to help you out. Without the contents of the factory.txt file. we will not be able to help.
Q: It doesn’t beep a single time for me, it beeps 3 times and goes back to the XMB. Can you help?
A: We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: failed to read EPROM», in the factory.txt error log. Can you help?
A: You likely heard 3 beeps. We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: SS EPROM read error returned: 1, product_mode: 0», in the factory.txt error log. Can you help?
A: You likely heard 3 beeps. We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: LV1 mmap hvcall 114 not available:», in the factory.txt error log. Can you help?
A: You likey have OFW (With Original PSJB Dongle even) or a reDRM Firmware. You will need to switch to a MFW to get this application to work.
Q: I see this, «ERROR: LV2 poke syscall not available:», in the factory.txt error log. Can you help?
A: You likey have OFW (With Original PSJB Dongle even) or a reDRM Firmware. You will need to switch to a MFW to get this application to work.
Q: I get a 80010505 error in factory.txt on the USB drive sometimes. HELP.
A: We noticed this on one Phat CECHG system in testing. but could not replicate it on other PS3’s and it only occured after the initial run from a power on of the PS3. In this case, every time we ran it a second time the application worked with out fail. Try again and post the factory.txt if the problem persists.
Q: Could you have made this just a little easier to use?
A: Nope! 😉
Factory service mode ps3 что это
НЕЛЬЗЯ ИСПОЛЬЗОВАТЬ НА НЕПРОШИВАЙКАХ!
Q: Can I use this with the RSOD fix self you released earlier?
A: You should only use the RSOD fix Lv2Diag.self to repair a RSOD PS3. Use the suplied Lv2diag.self packaged with this release to simply get out of service mode.
Q: I’m having problems. help.
A: Post the contents of the factory.txt, which is stored on the root of the USB flash drive where you put Lv2Diag.self, along with a detailed explanation and we will try to help you out. Without the contents of the factory.txt file. we will not be able to help.
Q: It doesn’t beep a single time for me, it beeps 3 times and goes back to the XMB. Can you help?
A: We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: failed to read EPROM», in the factory.txt error log. Can you help?
A: You likely heard 3 beeps. We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: SS EPROM read error returned: 1, product_mode: 0», in the factory.txt error log. Can you help?
A: You likely heard 3 beeps. We attempted to fixed this in the v.2 version of the app, ensure you have that one installed. If you do have that installed. Run the app a second time, without shutting down or restarting the PS3.
Q: I see this, «ERROR: LV1 mmap hvcall 114 not available:», in the factory.txt error log. Can you help?
A: You likey have OFW (With Original PSJB Dongle even) or a reDRM Firmware. You will need to switch to a MFW to get this application to work.
Q: I see this, «ERROR: LV2 poke syscall not available:», in the factory.txt error log. Can you help?
A: You likey have OFW (With Original PSJB Dongle even) or a reDRM Firmware. You will need to switch to a MFW to get this application to work.
Q: I get a 80010505 error in factory.txt on the USB drive sometimes. HELP.
A: We noticed this on one Phat CECHG system in testing. but could not replicate it on other PS3’s and it only occured after the initial run from a power on of the PS3. In this case, every time we ran it a second time the application worked with out fail. Try again and post the factory.txt if the problem persists.
Q: Could you have made this just a little easier to use?
A: Nope! 😉