Failed to mount vendor invalid argument twrp что делать

18.04.202218.04.2022 admin 0 Comments

Как исправить невозможность смонтировать хранилище в TWRP Recovery

В этом руководстве мы покажем вам шаги по исправлению невозможности смонтировать хранилище в TWRP Recovery. Экосистема Android, благодаря своей природе с открытым исходным кодом, допускает множество настроек.

Единственное требование — разблокировать загрузчик устройства. Как только вы этого добьетесь, вы сможете запустить множество пользовательских двоичных файлов, модов, пользовательских ПЗУ и даже Magisk для рутирования вашего устройства. Однако стандартное восстановление не может установить эти файлы. Вам нужно будет установить кастомное рекавери, например TWRP.

После того, как ваше устройство загрузится в это восстановление, вы можете стереть различные разделы устройства, выполнить резервное копирование Nandroid и, конечно, прошить вышеупомянутые файлы. Однако несколько раз вы можете столкнуться с ошибкой или двумя.

Среди них самые распространенные и пугающие, похоже, не могут смонтировать ошибку хранилища при отображении TWRP. В этом руководстве мы рассмотрим различные причины этой ошибки, а затем перечислим возможные исправления для исправления этой ошибки. Следуйте.

Причина невозможности смонтировать хранилище в TWRP

Первая причина, по-видимому, связана с тем, что внутреннее хранилище вашего устройства зашифровано. В результате TWRP не может расшифровать его на ходу и, следовательно, не может получить доступ к файлам, хранящимся на вашем устройстве.

Это причина, по которой эта ошибка чаще всего возникает, когда вы собираетесь прошить файл с помощью этого восстановления.

В других случаях ваш раздел данных может быть поврежден из-за того, что мигает неправильный файл или файл в неправильном разделе. Во всех этих сценариях ваш TWRP может отображать внутреннее хранилище как имеющее 0 МБ занятого места.

Но не волнуйтесь, это не так, и ваши данные на данный момент могут быть все еще нетронутыми. Итак, с учетом сказанного, вот различные методы исправления невозможности монтировать хранилище в TWRP Recovery.

Как исправить невозможность смонтировать хранилище в TWRP Recovery

Мы поделимся тремя разными способами решения этой проблемы. Следуйте инструкциям в том же порядке, как указано. Просто убедитесь, что ваше устройство уже загружено в TWRP. Е

Исправление 1: удалить экран блокировки

Если вы используете графический ключ на своем устройстве, TWRP не сможет его расшифровать. Рекомендуется переключиться на пин-код или пароль.

Теперь попробуйте прошить нужные файлы и посмотрите, исправлена ли проблема с невозможностью монтировать хранилище в TWRP Recovery.

Исправление 2: восстановить или изменить файловую систему

Вы также можете попробовать восстановить или изменить файловую систему вашего устройства. Все это можно было сделать прямо из самого TWRP.

Убедитесь, что вы по-прежнему получаете сообщение об ошибке «Невозможно смонтировать хранилище при восстановлении TWRP».

Исправление 3: форматирование внутренней памяти

Убедитесь, что вы создали эту резервную копию на SD-карте или USB OTG, а не в памяти телефона, так как мы собираемся полностью стереть этот раздел. Когда вы закончите резервное копирование, выполните следующие действия.

Мы поделились тремя разными методами для одного и того же, дайте нам знать, какой из них сработал за вас.

Источник

How to Fix failed to mount /system (invalid argument) in TWRP

In this guide, we will show you the steps to fix the failed to mount /system (invalid argument) error in TWRP. Each device has quite a few partitions. Some of them include the boot, recovery (in A-only device), vendor, vbmeta, userdata, system, etc. While the number, type, and size of partitions might vary across various devices, the aforementioned partitions could be found on near about every device.

And while each of these partitions are important in their own rights, it is the system partition that could be categorized as the most important one. The reason is pretty simple: it holds your OS. However, if there’s an issue with this partition, there are bound to be issues. Among the various issues, the most common is associated with TWRP.

Many concerned users have complained that they are unable to mount the system partition on their device. As a result, every time they are about to flash a Custom ROM, TWRP displays the failed to mount /system (invalid argument) error message. While this issue is justifiably concerning, fortunately, it could be fixed via a few workarounds. So without further ado, let’s check them out.

How to Fix failed to mount /system (invalid argument) in TWRP

Before trying out any of the below-mentioned fixes, it is highly recommended to take a backup of all the data on your device. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.

Fix 1: Install Stock Firmware via TWRP

In this method, we will be wiping all the device partitions and then flashing the stock OS via TWRP. While most devices come with a Recovery ROM (including OnePlus’s OxygenOS and Xiaomi’s MIUI Recovery ROM), there are some that don’t have a custom recovery-supported flashable ROM.

For those set of devices, they should refer to our guide to Flash Stock Firmware via Fastboot Commands. Whereas for other users who could flash stock ROM via TWRP, they should proceed with the below instructions:

Fix 2: Repair System Partition via TWRP

You could also use the TWRP’s built-in Repair File System feature to repair the system partition on your device. Here’s how:

Fix 3: Refresh EXT4 File System via TWRP

By default, your device would be having the EXT4 File System. In this section, we would change it to EXT2 and then revert to the original EXT4. Here’s how it could be done:

So with this, we conclude the guide on how to fix the failed to mount /system (invalid argument) error in TWRP. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.

FAQs: Wipe System Partition via Fastboot Commands

If you cannot select the System Partition via TWRP, then you would have to wipe it via Fastboot Commands. Here’s how it could be done:

About Chief Editor

Sadique Hassan

A technical geek by birth, he always has a keen interest in the Android platform right since the birth of the HTC Dream. The open-source environment always seems to intrigue him with the plethora of options available at his fingertips. “MBA by profession, blogger by choice!”

Источник

Unable to mount /vendor /product /version

Breadcrumb

Bluesyle

Member

lostunsunghero

Senior Member

Have you tried the dload method to flash back to stock or the huawei updater and hisense? Then redo everything from unlocking the bootloader to installing twrp and root. From there try to restore your backup. As far as i know this should work if all else fails, having done the exact same thing myself as you previously.

In the future when installing a custom rom the only partitions you need to wipe for a clean install are

Dalvik/ART
Cache
System
Data
Internal Storage (optional)

Bluesyle

Member

In the future when installing a custom rom the only partitions you need to wipe for a clean install are

Dalvik/ART
Cache
System
Data
Internal Storage (optional)[/Q

lostunsunghero

Senior Member

Only if you were on b378 before you messed up the phone or plan on flashing a b378 based ROM. Otherwise you will have to download a stock firmware and extract the boot.img from there. You can find stock firmwares in this thread:

LastStandingDroid

Guest

Reflash stock rom Boot into stock recovery after flash and wipe data factory reset.

Sent from my NATASHA using Tapatalk

chemicalfx

New member

Same Problem with Huawei Honor 8 FRD-L04

Having the same issue only without these vendor, version, etc mounting, nothing will flash. including stock. Bootloader works, TWRP works, cant mount, repair, or format partitions. This happened after flashing Revolution I believe. If anyone has a walk through for a potential fix, I’m all ears!

>Reaper Jul 14, 2010 5 0

cfrisen

New member

Hi everyone,
I did a disaster My Huawey P9 have non OS installed. I can only enter into TWRP 3.1.0-3 version.
The TWRP write:
Updating partition details.
Failed to mount ‘/cust’ (Invalid argument)
Failed to mount ‘/system’ (Invalid argument)
Failed to mount ‘/vendor’ (Invalid argument)
Failed to mount ‘/product’ (Invalid argument)
Failed to mount ‘/version’ (Invalid argument)
. done
Full SELinux support is present.
MTP Enableb

What can I do to install the OS and unbrick the phone? Can you help me step by step?

Thank you very much

džejms din

Member

Bluesyle

Member

džejms din

Member

Senior Member

Every few days somebody opens such a thread, having the phone similarly bricked. When asking what did you do, it turns out that he was on some of the AOSP based custom ROMs (there are couple of them), and he wanted to go back to stock, or he wanted to try/flash to the other custom ROM, etc.

If they don’t provide such info, why people do not first ask there (before bricking the phone)? IMO, developers of those custom ROKs would know the answer, if asked (supposidely they test their custom ROMs on various configurations and they have to go back to stock and forth to custom).

King_of_Android

Member

What can I do to install the OS and unbrick the phone? Can you help me step by step?

Thank you very much

What can I do to install the OS and unbrick the phone? Can you help me step by step?

Thank you very much

sathishslavik

New member

Источник

How to Fix failed to mount /vendor (invalid argument) in TWRP

In this guide, we will show you the steps to fix the failed to mount /vendor (invalid argument) error in TWRP Recovery. Every device comes with a few specific partitions. These include the system, boot, recovery (in A-only device), userdata, vbmeta, vendor among others. The system partition contains the OS, then in A/B partition devices, the boot also acts as a recovery partition. Likewise, userdata could be considered as the partition that beholds all your important data.

However, there’s no universal rule as such that each device should have an N number of partitions. As already mentioned, many devices don’t have the recovery partition and hence boot takes care of installing a custom recovery. Along the same lines, many Xiaomi devices come with a Super partition, which is an amalgamation of system, vendor, and product partitions. But why are we bringing all these here? Well, it will help you in understanding the failed to mount /vendor (invalid argument) error in TWRP Recovery and its fix.

Failed to mount /vendor (invalid argument)

This error message shows up in TWRP Recovery when you are trying to flash a custom ROM (or any other related mods, tweak). So why does it happens? This message shows up in those set of devices that doesn’t have a vendor partition. Since there is no vendor partition, TWRP wouldn’t be able to mount it in the first place! A perfect example of such a device is the OnePlus 5/5T.

Since vendor partition is used for treble compatible devices and your device is not treble compatible, hence there wouldn’t be any /vendor partition. As a result, when you would be flashing a non-treble ROM, you will be greeted with the failure message. So is this a cause of concern? In most cases, no it isn’t! Even if you are seeing the failed to mount /vendor (invalid argument) error message, the file would have been successfully flashed onto your device.

The next time you flash any other related file, you may again see this error message in red color. But that’s it, it wouldn’t conflict with the normal device usage or flashing any custom binary. However, if you are stuck with this error and aren’t able to carry out the desired task, then only you should consider fixing it. And turns out there are a couple of workarounds that are known to rectify the same.

Let’s check out two such methods that will help you fix the failed to mount /vendor (invalid argument) error in TWRP. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.

Install a Treble Supported Rom and Fix Failed to Mount /Vendor

The first fix requires you to flash a treble supported custom ROM onto your device. Here’s how:

Check for Project Treble Support

First and foremost, install the Treble Check App from Play Store. Now launch it and if you see a tick mark next to Project Treble with the supported keyword underneath it, then you are good to proceed ahead.

Download Treble Supported Rom

The next step then involves flashing a Treble Supported Rom onto your device. For that, you need to find a ROM that belongs to this domain. Mokee ROMs might work perfectly in such scenarios [Download Link].

Install TWRP Recovery

Once you have downloaded the ROM of your choice, make sure that you have a working TWRP installed onto your device. Most of you would already have it installed. If not, then refer to our detailed guide to Install TWRP Recovery on Android.

Boot to TWRP Recovery

Now boot your device to TWRP Recovery. For that, you may either use the hardware key combinations or refer to our guide: How to Boot into Recovery (TWRP/Stock). [In short: use the adb reboot recovery command].

Flash Treble Supported ROM via TWRP

Each ROM has a different set of flashing steps, I am listing out the generalized set of instructions. If there is any additional step (or file that needs to be flashed), make sure to check out the ROM/developer’s page. Furthermore, the below steps will wipe off all the data, so take a backup beforehand (Nandroid is recommended).

Treblize the Device and Fix Failed to mount /vendor

You may also treblize your device, by flashing the ZIP module for your device. Unfortunately, getting hold of the same is no easy task. As of now, I was able to fin the module for the OnePlus 5T, you may download it from here: treblizer_cheeseburger.zip. For other devices, you may search in XDA Forums.

Conclusion

So this was all from this guide on how to fix the failed to mount /vendor (invalid argument) error in TWRP. As already mentioned, more often than not, this error message isn’t a cause of concern and would allow you to carry out the desired task with ease.

Only when it conflicts with the flashing of files, you should consider carrying out the above-mentioned methods. With that said, if you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest.