Fn link technology limited что это
Fn link technology limited что это
Обсуждение Z28 на базе RK3328
Z28, Z28 pro, AlfaWise Z28 pro
Обсуждение »
|
Информация по версиям у продавцов может быть не актуальна. Проверяйте каждый лот, не бойтесь спрашивать версию платы у продавцов.
Оригинальныя Z28 Pro AlfaWise 2\16
Оригинальный Z28 1\8
Оригинальный Z28 2\16
Вопрос: Хочу купить Z28, но не знаю, какую выбрать?
Ответ: Либо оригинальную Z28 (она дешевле и с ней в плане прошивок все хорошо по сравнению с удешевленной Z28), либо оригинальную Z28 Pro (гигабитный ethernet + bluetooth, но чуть-чуть меньше доступных прошивок по сравнению с оригинальной Z28), удешевлённую Z28 тоже можно брать, но кастомных прошивок пока на нее с работающим WiFi нету, удешёвленную Z28 pro брать в последнюю очередь. Подробнее по этой ссылке. При выборе уточняйте у продавца, какой чип WiFi стоит внутри. Если нет необходимости в кастомных прошивках, то выбирайте какая больше по внешнему виду, цене и заявленным характеристикам нравится.
Вопрос: Подходит ли прошивка от 1\8 версии на 2\16 и наоборот?
Ответ: Да, подходит, в пределах одного типа устройства. (от обычного z28 1\8 пойдет на обычный z28 2\16 и наоборот, но на удешевленном z28 может не заработать, например, WiFi)
Вопрос: У меня плохо ловит пульт, это нормально?
Ответ: Да, так у всех. Требует либо доработки (например, такой), либо привычки (пульт надо направлять четко на устройство), либо использования альтернативных средств управления (клавиатура, радиомышь или другое.)
По вопросам наполнения шапки обращайтесь к модераторам раздела, отправив «Жалобу» на сообщениях, ссылки на которые необходимо добавить.
TrackerJacker – отслеживает устройства WiFi, захватывая необработанные фреймы 802.11 в режиме монитора
Находит и отслеживает устройства Wi-Fi через внешний мониторинг 802.11.
Установка
Применение
Вы можете найти подробное описание следующим образом:
Существует два основных режима использования для trackerjacker: map mode и track mode:
Map mode пример
Map mode выводит wifi_map.yaml, который выглядит примерно так:
Track mode пример
Track mode позволяет указать некоторое количество MAC-адресов для просмотра, и если указанные устройства превышают пороговое значение (в байтах), будет активировано предупреждение.
Примеры использования
Пример: настройка с помощью аргументов командной строки
В этом примере контролируется MAC-адрес: 8a: 23: ab: 75: 8e: 2b
При обнаружении текущее время добавляется к /tmp/test.txt
Пример: настройка с помощью файла конфигурации
Пример: Включить / отключить режим мониторинга на интерфейсе
Активировать режим мониторинга:
Обратите внимание, что trackerjacker автоматически включит / отключит режим монитора, если это необходимо. Эта функция просто полезна, если вы хотите включить режим мониторинга на интерфейсе для использования с другими приложениями.
Пример: Установить канал адаптера
Обратите внимание, что trackerjacker автоматически переключает каналы по мере необходимости в режимы map и track. Этот параметр полезен, если вы хотите установить канал на интерфейсе для использования с другими приложениями.
FN-LINK TECHNOLOGY LIMITED
Company Product
b/g/n Wi-Fi/BT Module F23BUUM25-B1
Main chip: RTL8723BU
Transmission speed: 150Mbps
Working voltage: 5Vdc
Antenna connection method: Onboard
Product introduction
Meet IEEE wireless standard
Support 64/128 bit WEP data encryption
Support WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism
Module is: Tablet / notebook, Advertising machine /TV board,OTT/IPTV/DVB/STB,Printer /POS machine / electronic said,Vehicle mounted front / rear terminal /Toys and other consumer electronic products
b/g/n Wi-Fi/BT Module F23BUUM13-W2
b/g/n Wi-Fi/BT Module F23BUUM13-W2
Main chip: RTL8723BU
Transmission speed: 150Mbps
Antenna connection method: External
Product introduction
Meet IEEE wireless standard
Support Bluetooth and dual mode
Support 64/128 bit WEP data encryption
Support WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism
Module is: Tablet / notebook, Advertising machine /TV board,OTT/IPTV/DVB/STB,Printer /POS machine / electronic said,Vehicle mounted front / rear terminal /Toys and other consumer electronic products
b/g/n Wi-Fi/BT Module FN-8126B3EU
Main chip: RTL8188EUS
Transmission speed: 150Mbps
Antenna connection method: External
Product introduction
Meet IEEE wireless standard
Support 64/128 bit WEP data encryption
Support WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism
b/g/n Wi-Fi/BT Module FN-8112MET
Main chip: RTL8188ETV
Transmission speed: 150Mbps
Antenna connection method: External
Product introduction
Meet IEEE wireless standard
Support 64/128 bit WEP data encryption
Support WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism
Module is: Tablet / notebook, Advertising machine /TV board,OTT/IPTV/DVB/STB,Printer /POS machine / electronic said,Vehicle mounted front / rear terminal /Toys and other consumer electronic products
b/g/n Wi-Fi/BT Module 6223E-UUD
Main chip: RTL8723DU
Transmission speed: 150Mbps
Antenna connection method: External
Product introduction
Meet IEEE wireless standard
Support Bluetooth and dual mode
Support 64/128 bit WEP data encryption
Support WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism
a/b/g/n/ac Wi-Fi/BT Module 8274B-SR
Main chip: QCA6174A
Package size: * Solder Down
Physical interface: SDIO/Uart/PCM
Transmission speed: 867Mbps
Antenna connection method: External
Product introduction
Meet IEEE wireless standard
Support Bluetooth and dual mode
Support 64/128 bit WEP data encryption
Support WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism
a/b/g/n/ac Wi-Fi/BT Module 8274B-PR
Physical interface: PCIe/Uart
Transmission speed: 867Mbps
Antenna connection method: External
Product introduction
Meet IEEE wireless standard
Support Bluetooth and dual mode
Support 64/128 bit WEP data encryption
Support WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism
a/b/g/n/ac Wi-Fi/BT Module 6222D-UUB
RF BT Module
Function:
Main chip: RTL8822BU
Physical interface: USB
Transmission speed: 867Mbps
Antenna connection method: External
Product introduction
Meet IEEE wireless standard
Support Bluetooth and dual mode
Support 64/128 bit WEP data encryption
Support WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism
a/b/g/n/ac Wi-Fi/BT Module 6222B-SRB
Main chip: RTL8222BS
Physical interface: SDIO/Uart
Transmission speed: 867Mbps
Antenna connection method: External
Product introduction
Meet IEEE wireless standard
Support Bluetooth and dual mode
Support 64/128 bit WEP data encryption
Support WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism
a/b/g/n/ac Wi-Fi/BT Module 8223A-UUH
Main chip: QCA1023 QCA9377
Package size: *mm LGA
Transmission speed: 433Mbps
Antenna connection method: External
Product introduction
Meet IEEE wireless standard
Support Bluetooth and dual mode
Support 64/128 bit WEP data encryption
Support WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism
BLE Modules RF-CC2540(T)A
RF Modules Supplier
The module can work in bridge mode (transparent transmission mode) and direct-drive mode.
After being started, the module can broadcast automatically. Smart phones with specific application running will scan and pair with it. When connection success, the smart phone can monitor and control the module through Bluetooth protocol.
Product details:
In bridge mode, user «s MCU can communicate with the mobile device in two-way through module»s UART. Users can also manage and control certain communication parameters through specific UART AT commands.
The detailed meaning of the user data is defined by the up-application. Mobile devices can write to the module through the APP. And the data written will be sent to the user’s MCU through UART. Then the module will transmit the data package from user MCU to the mobile devices automatically. In the development under this mode, the user need to undertake the code design for MCU code, and the code design of APP for smart mobile terminals.
In Direct-Drive mode, users take simple periphery expansion to the module. And APP drives the module directly through BLE protocol, to implement the monitoring and control of the module by smart mobile devices. In this mode, users only need to do the code design for smart mobile terminals.
Features
RF Modules Supplier
The module can work in bridge mode (transparent transmission mode) and direct-drive mode. After being started, the module can broadcast automatically. Smart phones with specific application running will scan and pair with it. When connection success, the smart phone can monitor and control the module through Bluetooth protocol.
In bridge mode, user ‘s MCU can communicate with the mobile device in two-way through module’s UART. Users can also manage and control certain communication parameters through specific UART AT detailed meaning of the user data is defined by the up-application. Mobile devices can write to the module through the APP. And the data written will be sent to the user’s MCU through the module will transmit the data package from user MCU to the mobile devices the development under this mode, the user need to undertake the code design for MCU code,and the code design of APP for smart mobile terminals.
In Direct-Drive mode, users take simple periphery expansion to the module. And APP drives the module directly through BLE protocol, to implement the monitoring and control of the module by smart mobile devices. In this mode, users only need to do the code design for smart mobile terminals.
Features：
1. Easy to use, no need of any experience of Bluetooth protocol stack application
2. UART design for user interface, full-duplex bi-directional communication, and supporting the minimum baud rate of 4800 bps;
3. Supporting bridge mode (USART transparent transmission), and direct-drive mode (no additional MCU needed);
BLE Modules RF-BM-S02
RF Modules Supplier
The module can work in bridge mode (transparent transmission mode) and direct-drive mode. After being started, the module can broadcast automatically. Smart phones with specific application running will scan and pair with it. When connection success, the smart phone can monitor and control the module through Bluetooth protocol.
In bridge mode, user ‘s MCU can communicate with the mobile device in two-way through module’s UART. Users can also manage and control certain communication parameters through specific UART AT detailed meaning of the user data is defined by the up-application. Mobile devices can write to the module through the APP. And the data written will be sent to the user’s MCU through the module will transmit the data package from user MCU to the mobile devices the development under this mode, the user need to undertake the code design for MCU code,and the code design of APP for smart mobile terminals.
In Direct-Drive mode, users take simple periphery expansion to the module. And APP drives the module directly through BLE protocol, to implement the monitoring and control of the module by smart mobile devices. In this mode, users only need to do the code design for smart mobile terminals.
Features：
1. Easy to use, no need of any experience of Bluetooth protocol stack application
2. UART design for user interface, full-duplex bi-directional communication, and supporting the minimum baud rate of 4800 bps;
3. Supporting bridge mode (USART transparent transmission), and direct-drive mode (no additional MCU needed);
BLE Modules RF-BM-S01A
RF Modules Supplier
RF-BM-S01A BLE module applies CC2541 from TI as core processor. The module runs at ISM band, with GFSK (Gaussian Frequency Shift Keying) modulation scheme. It has 40 channels(channel space at 2MHz), among which there are 3 fixed radio channels and 37 data channels of adaptive automatic frequency hopping. Physical layers can be combined with classic Bluetooth RF to form a dual mode device. And 2 MHz’s channel space can prevent interference from adjacent channels better. Besides, it has a wide output power adjustment (-23 dBm
The module is designed to quickly connect electronic products with smart mobile devices, and can be widely used in various electronic devices, such as instruments, logistics tracking, healthcare, smart home, sports metering, automotive electronics, toys, and etc. With Android smart devices integrated with BLE technology, it will be a trend that BLE will be the standard configuration of smart phones. And the market demand on smart phone peripherals will increase geometrically. With this module, users can integrate their existing solutions or products in the shortest development cycle, to occupy the market in the fastest speed, and to empower their company’s growth with the strength of new technology.
Features：
1. Easy to use, no need of any experience of Bluetooth protocol stack application
2. UART design for user interface, full-duplex bi-directional communication, and supporting the minimum baud rate of 4800 bps;
3. Supporting bridge mode (USART transparent transmission), and direct-drive mode (no additional MCU needed);
BLE Modules RF-BM-S01
RF Modules Supplier
RF-BM-S01 BLE module applies CC2540 from TI as core processor. The module runs at ISM band, with GFSK (Gaussian Frequency Shift Keying) modulation scheme. It has 40 channels(channel space at 2MHz), among which there are 3 fixed radio channels and 37 data channels of adaptive automatic frequency hopping. Physical layers can be combined with classic Bluetooth RF to form a dual mode device. And 2 MHz’s channel space can prevent interference from adjacent channels better. Besides, it has a wide output power adjustment (-23 dBm
The module is designed to quickly connect electronic products with smart mobile devices, and can be widely used in various electronic devices, such as instruments, logistics tracking, healthcare, smart home, sports metering, automotive electronics, toys, and etc. With Android smart devices integrated with BLE technology, it will be a trend that BLE will be the standard configuration of smart phones. And the market demand on smart phone peripherals will increase geometrically. With this module, users can integrate their existing solutions or products in the shortest development cycle, to occupy the market in the fastest speed, and to empower their company’s growth with the strength of new technology.
Features：
1. Easy to use, no need of any experience of Bluetooth protocol stack application
2. UART design for user interface, full-duplex bi-directional communication, and supporting the minimum baud rate of 4800 bps;
3. Supporting bridge mode (USART transparent transmission), and direct-drive mode (no additional MCU needed);
fn-link technology
What I do is use a device called fn-link to take a screenshot of what I’m doing and turn it into a link. I then upload it to a database of some kind, and I put in my pictures as my pictures. The file is then placed in a folder in my home computer.
The most useful aspect of fn-link is that it’s very easy to use. The only issue with it is that I’m not sure how to make it work with folders. But for now, I’m sticking with it and I love it. I hope you do too.
It’s my favorite part of the game. I love the fact that I can snap a quick screenshot, and then just put it into a folder. Then I can drag it into my game and my game will automatically upload it and send it to the database. And it’s amazing because there is no way to have the game upload it to your local computer, it has to upload it to the server. And the server is where my pictures are stored.
It’s a system that I’m not sure you can replicate in real life. But I bet you could find a way to create a folder with a shortcut to your local drive that you can drag into your folder and it’ll automatically send it to the server.
It’s a very exciting system, and it’s one that I hope will eventually become a part of your game. I also hope it can be integrated into the game. For now, you can drag your shortcut into your folder and it will automatically be sent to the server.
My guess is that there are going to be some new systems in fn-link that have some serious potential, but as it stands right now they’re just little hacks that can be useful for a handful of people. I think there will be some sort of interface that makes it easy to add a shortcut to your local hard drive, or at least that’s what it’s going to look like.
I’ve always kind of liked the idea of sending shortcuts to other people’s computers without them having to mess with all the settings and make changes where it’s not needed. I just wish there was a way for them to actually change shortcuts without having to hack into your computer.
You probably already have a shortcut to your computer. Or you can choose your own. But there’s no way to really go through all the settings and add your own shortcut to all the others without using all the settings.
So, like I said, this year I’ve been experimenting with fn-link technology. I set up a shortcut to my computer called fn-link. And that shortcuts to other computers and all the other shortcuts I want. But I have to do a little bit of hacking to get it set up. It’s easy enough, I just need a few minutes to make it work.
fn-link provides a shortcut to your computer for your shortcuts to other computers. It can get tricky, but you can use a special key combination to create your own shortcut on your computer. It’s possible to use it with any computer, but I like using it on my laptop. I can easily add my own shortcut to all the other computers on my network.