Failed to synchronize registry data from server closing connection что делать атернос
Failed to synchronize registry data from server Minecraft – как исправить?
«Майнкрафт» — одна из самых популярных в мире компьютерных игр в жанре песочницы, с более чем 120 миллионами активных пользователей по всему миру. Возможность не только играть в компьютерном 3Д-мире, но создавать свои собственные локации пришлась по вкусу многим игрокам. И вот почему количество активных пользователей игры постоянно растёт.
Создав свой собственный игровой сервер, и добавив к нему необходимые модификации, игрок приглашает на него других пользователей для совместной игры. При попытке входа последних на сервер они могут встретиться с ошибкой «Failed to synchronize registry data from server» в игре Minecraft. Что это за ошибка и как её исправить – расскажем в нашем материале.
Причины ошибки в Minecraft
В переводе текст ошибки Failed to synchronize registry data from server выглядит как «Неудача в синхронизации данных реестра с сервера». Проблема обычно возникает при попытке сторонних (приглашённых) игроков войти на сервер, созданный пользователем, на который добавлены различные сторонние моды. При попытке подключения к такому серверу игрок сталкивается с указанной ошибкой, а неоднократные попытки переподключения к серверу никак не решают проблему.
В некоторых случаях дисфункция также может наблюдаться с серверами, к которым ранее игроки подключались без каких-либо проблем.
Обычно причинами ошибки «Failed to synchronize registry data» является следующее:
Давайте рассмотрим, как решить ошибку «Failed to synchronize registry data from server» в игре Майнкрафт.
Убедитесь, что используемый вами клиент и моды имеют одинаковую версию
Частая причина рассматриваемой нами ошибки – это установленные на ПК разные версии клиента и мода Майнкрафт. Либо пользователь использует устаревшую версию клиента, либо какой-либо мод, установленный на сервере Майнкрафт, не обновлён.
Рекомендуем обновить ваш клиент, а затем и каждый из ваших модов один за другим.
После обновления ошибка «Failed to synchronize registry data» в Майнкрафт может исчезнуть. Если ошибка продолжает появляться, переходите к следующему разделу.
Установите последнюю версию Forge
Если на вашем компьютере уже установлена последняя версия клиента и модов, то следующим шагом будет установка последней версии «Forge» — специального API, упрощающего создание модификаций и работу с ними. Обновите «Forge» до актуальной версии, и если проблема продолжает появляться, идём далее.
Удалите моды одни за другим
Одной из причин ошибки «Failed to synchronize registry data from server» в Minecraft является наличие проблемного мода, вызывающего дисфункцию и конфликт системы. Рекомендуем поочередно удалить моды один за другим. После каждого удаления мода попробуйте перезапустить игру и загрузить сервер. Довольно часто именно этот способ помогает решить рассматриваемую в статье ошибку.
Для удаления модов можно использовать новую версию Forge (там имеется инструмент для деактивации модов).
Также можно сделать это вручную, но есть шанс повредить внутренние объекты игры.
Полностью удалите все моды, а затем установите их поочерёдно
Хорошей альтернативой перечисленному чуть выше способу может стать полное удаление модов с сервера, а затем их установка один за другим, с проверкой системы на корректную работу. В некоторых случаях такой алгоритм позволял установить все необходимые моды, и рассматриваемой нами ошибки при этом не наблюдалось.
Заключение
В нашем материале мы разобрали, в чём заключается суть ошибки «Failed to synchronize registry data from server», и как исправить возникшую проблему. Обычно причиной ошибки являются устаревшая версия клиента, инструмента «Forge» или дисфункция какого-либо из модов. Выполните перечисленные нами советы, это поможет устранить рассмотренную в статье проблему при подключении к серверу Майнкрафт.
3 способа исправить ошибку при синхронизации данных реестра с сервером в Minecraft
В Minecraft у игроков есть возможность создать свой собственный сервер и управлять им. После его покупки владелец получает возможность:
Однако пользователи часто жалуются на наличие ошибки при синхронизации данных реестра с сервером в Minecraft. В зависимости от причины появления сообщения «Failed to synchronized registry data from the server» выбирается способ решения проблемы.
Ошибка Failed to synchronized registry data from the server в Minecraft
Моды и клиент имеют разные версии
Нужно последовательно обновить:
Если проблема не решена, переходите к следующему шагу.
Версия игры Minecraft
Старая версия Forge
Необходимо скачать последнюю версию Forge. Затем обновить и перезагрузить ПК. Если проблема не исчезла, переходите дальше.
Окно скачки Minecraft Forge
Удаляйте ваши модификации по одному
Возможно на компьютере стоит проблемный мод. Поэтому следует:
Данные шаги нужно выполнять после каждого мода.
Анастасия Табалина
Автор статей по настройке и управлению телефонами на базе Андроид и iOS. Помощь в мире онлайна и Интернета: поиск информации, обзоры приложений, программ, настройка и управление
Failed to synchronize registry data, closing connection on 1.16.5 #3270
Comments
Sorrow-Scarlet commented Jul 1, 2021
The text was updated successfully, but these errors were encountered:
Vazkii commented Jul 18, 2021
Is this a vanilla server?
Vazkii commented Jul 18, 2021
Oh, it’s definitely not vanilla if you have quark chests.
This strikes me as suspect in the log. What mod is this?
Sorrow-Scarlet commented Jul 19, 2021
oh. first,this is not a vanilla server,i just played with my friend,haha
not a real big server,p2p,
second i suspect this mod is Project:War Dance,this was the only mod which changed the combat mode.
link:https://github.com/Jackiecrazy/WarDance
but i need to say. my friend an me didn’t meet the crash and the error of Failed to synchronize registry data, closing connection until we developed certain level of the game,the interference factors are too more. first i was not a vanilla,and i used about 110 mods（but over 30mod were performance improving mods,haha）,which contained botania,slashblade,
my friend and i wanna keep quark still, ’cause quark chests contained all of our items. and our caves cant work without quark
Sorrow-Scarlet commented Jul 19, 2021
by the way,my device: 16g 3200mhz rtx 2060 R7 4800H
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
3 Ways To Fix Failed To Synchronize Registry Data From Server In Minecraft
Though we normally don’t really specialize in gaming-related issues here, every now and then, an interesting issue comes to our attention.
So, naturally, we need to give it at least a good shot. Having looked into an issue that a lot of you seem to be having on your Minecraft servers, we decided to put together a little guide to clear up a few things.
For us, one of the coolest things about Minecraft is that it allows players to create their own server and manage it as they see fit.
Effectively, you are thus enabled to build a world of your own and decide exactly what happens there. I mean, who doesn’t want that!
From here, the user can also add mods to the server to refine and modify their gaming experience. You then get to choose who is allowed into the server that you have created.
Rules can be created. The whole thing is actually really intricate, yet surprisingly easy to use when you know how to.
That being said, we know there isn’t a chance you would be here reading this if all of this was actually working as it should be.
Having trawled the internet to find the fixes that actually work, we have finally found the way to get around the “failed to synchronize registry data from server” problem that a lot of you seem to have with your servers.
So, if you are sick and tired of getting that message, we’ve got you covered. Just follow the tips below, and you should be back up and running in no time!
How to Fix Failed To Synchronize Registry Data From Server In Minecraft?
We’re glad you asked! You may have noticed that we mentioned above that it is possible to add a large range of mods to your server.
But, after doing so, a lot of users have noticed that they are starting to get errors straight away afterward.
To be more specific, most of you are getting the “failed to synchronize registry data from the server” warning every time they try to get into their server.
The bad news is that there are a huge number of reasons as to why this could be happening to you.
So, to get to the bottom of this, we aren’t exactly going to explain all of the possible causes.
Instead, we are just going to get straight into it and run through some fixes that will straighten things out, no matter what the cause. With that, let’s get stuck right into it!
1. Check That Your Mods and Client Have the Same Version
To start things off, we begin with the most common cause of the issue. It is relatively easy to have different versions of mods and the Minecraft client installed by accident.
So, you will need to check that all of these are on the same version. If they are not running on the same version, there is no chance that they will work.
After you have updated everything that is needed, things should start working as they should be again.
However, this trick won’t work for all of you. If you are still not getting the desired results, it is time to move onto the next step.
2. Make Sure You Have Installed The Latest Version of Forge
Though the above fix will have worked for most of you, there are still some other things that can cause the problem that we need to rule out.
Another really common cause of the problem is that you may not be running the right version of Forge. Perhaps you accidentally missed an update somehow.
Given that pretty much every online Minecraft player will have Forge installed, it is important to keep on top of version changes on this front too.
Again, this will have worked for quite a lot of you, but not everyone. So, if you are still having problems, it is time to try our last fix.
This one up the ante a little, but it will give you a decent chance of getting back up and running again.
3. Remove All of Your Mods
Though this may seem like a bit of a crazy suggestion, it wouldn’t be here if it didn’t work.
At this point, if nothing else has worked, we can only attribute the problem to a broken mod that is causing absolute havoc.
This way, when it works again, you will know which mod was the cause of the problem in the first place.
Yes, we will admit that this can be a bit painstaking, especially if you are running quite a few mods, but it will help you get to the bottom of it.
The Bottom Line
Unfortunately, these are the only problems that we could find that actually worked.
However, we are always aware that there is a possibility that we may have missed something that seemed obvious to one of you reading this.
So, if you happen to be reading this and are a bit of an innovator in this regard, we would love to hear how you did it in the comments section below.
That way, we can pass on the word to our readers and save some headaches further down the line. Thanks!
5 thoughts on “3 Ways To Fix Failed To Synchronize Registry Data From Server In Minecraft”
MY MINECRAFT WONT WORK AND MINE RAFT IS MY FAVOURITE GAME IM 13amd I will still play it help me with my Minecraft it just wont load it stays on white I have been playing Minecraft for 6 years so help me
I tried the steps on this page but it still doesn’t work. The host computer is a PC while the one trying to join is a Mac. We have the latest versions (forge and optifine) and no mods installed but it still says failed to synchronize registry. I wonder why this could be, do you guys have any things else we could try? Thanks.
maybe you can try like deleting and recreating the server or trying to make the server forge version a bit lower but ur mc version higher than it or if none of this works then delete all your mods delete the server then recreate the server and download your mods again i hope any of these work
idea make sure the mods are in the right order
All my friends can join the server but its just my computer that says this. any ideas?
Fix: ‘Failed to synchronize registry data from server’ Minecraft
Minecraft is a 3-D computer game in which players may construct anything. The game, which has been compared to an “online Lego,” includes assembling bricks and constructing buildings across various locations and terrains. The game takes place in a virtual environment and includes resource collecting, creating goods, construction, and fighting.
It is now one of the most prominent games in the world and maybe a great method for children to educate about innovation and teamwork.
Minecraft may be played on a computer, a smartphone, a tablet, or a gaming console. Depending on the gadget you choose, the game may cost about €20.00.
Minecraft is very popular among children, especially those aged 6 to 13. The fact that players may build anything is what makes the game so popular. There are no restrictions in the game, and the options are limitless, from cities to roller coasters and everything in between.
The game also has a multiplayer option, which is popular among young players who love playing with their friends and assisting one other in building new inventions. The flexibility that the game provides is appealing to the majority of youngsters.
Fix: ‘Failed to synchronize registry data from server’ Minecraft
Recently, players in Minecraft have been reporting an error which has proven to be quite frustrating.
Several players have resorted to social media to report that they are facing an issue where they constantly receive the message, failed to synchronize registry data from the server.
Now, as per our understanding, this error usually appears when players are using mods in the game.
Generally, the game means that the player doesn’t have the same versions of some mod. It could also be a problem with the client log.
Minecraft has made it possible for its players to add a wide array of mods to their servers. So, as a result of that, players have been implementing a lot of mods on their games.
Apart from that, it has also come to our attention that people who have a different version of Forge installed on their device are encountering this error more than the others.
If the version of Forge installed on your device is different from the version of the server, then you might get the failed to synchronize registry data from the server closing connection in Minecraft error.
Because of that this error has been popping up and hampering the gameplay of a lot of people from the Minecraft community.
In the following segment, we will be discussing how you guys could go about trying to solve the issue at hand so you don’t have to compromise on playing Minecraft again
#1 Verify that your mods and client are running the same version.
Step 1: Check the mods
To commence, we’ll look at the most frequent source of the problem. It is very simple to install various versions of modifications and the Minecraft client by mistake.
Step 2: Ensure all of them are on the same version
As a result, you must ensure that all of them are in the same version. There is no way they will function if they are not operating on the same version.
Step 3: Upgrade the client if necessary.
Upgrading the client is simple and may be completed in a single step.
Step 4: Verify and check the mods
The modifications, on the other hand, are a different story. You would need to go through and verify each of them one by one.
Step 5: Update as per requirement
After you’ve upgraded everything that’s required, things would be back to normal.
This technique, unfortunately, will not work for everyone. If you’re still not receiving the results you want, it’s time to move on to the next stage.
#2 Verify that you have most recent version of Forge installed
Although this preceding solution should have worked for most of you, there are still a few additional possibilities that may be causing the issue that we require to rule out.
Step 1: Check for missed updates
Another frequent reason for the issue is that you are not using the correct version of Forge. Possibly you unintentionally skipped an update.
Step 2: Install the latest version of Forge
Given that almost every online Minecraft player will have Forge installed, it is critical to stay up to date on version updates in this area as well.
Step 3: Keep an eye out for future updates
So, all you have to do here is keep an eye out for developments.
Apparently, this would have worked for many of you, but not for all. So, if you’re still experiencing issues, it’s time to attempt our last solution. This one raises the stakes a bit, but it will offer you a good chance of getting back up and running.
#3 Uninstall All of Your Mods
Though this may seem to be an outlandish idea, it would not be here if it did not function.
Step 1: Delete corrupt Mods
At this point, if nothing else has worked, we can only blame the issue on a faulty mod that is wreaking havoc.
Step 2: Find and locate the Faulty mods and uninstall
So, the only logical next step is to uninstall your modifications one by one.
Step 3: Check the servers in Between
While you’re at it, be sure to give your server a shot after each one. This way, when it starts working again, you’ll know which mod caused the issue in the first place.
Yes, we agree that this may be time-consuming, particularly if you have a lot of modifications running, but it will help you get to the bottom of it.
Follow us on Twitter & like our Facebook page for more post-updates.
Check out related Minecraft posts
Abhigyan identifies himself as a tech geek, gaming cognoscenti, and also a connoisseur of music. Unidentified and mysterious phenomena never fail to gather his undivided attention. When not reading about bizarre and perplexing entities across the Universe, he can often be found cheering for his favorite teams in Football.